|
Our company offer a huge gamut of superior quality heat shrinkable power cable accessories. These heat shrinkable cable accessories are extensively used for cable applications in electrical distribution and industrial networks. These power cable accessories. Manufacturer fabricate it from superior quality materials. Moreover, these accessories are strictly checked for reliability under high electrical, thermal and environmental stress. Our various ranges of accessories are as follows:
1.) Heat Shrinkable Anti-Tracking Cable Breakout (Red)
Heat Shrinkable Anti-Tracking Cable Breakout are most used for cable applications in electrical distribution and industrial Networks. They are made of superior quality materials. Furthermore, they are strictly checked for reliability under high electrical, thermal and environmental stress. It is extensively used in electric power industry to bring insulation.
| Product Code |
As Supplied (mm) |
After Free Recovery (mm) |
| Body |
Finger |
Body |
Finger |
| D |
L |
d |
I |
D |
Thick |
L |
d |
Thick |
I |
| CIBR - 820 |
50 |
170 |
24 |
56 |
22 |
3.2 |
180 |
8.5 |
2.6 |
56 |
| CIBR-1230 |
80 |
190 |
40 |
56 |
36 |
3.8 |
215 |
11.1 |
3 |
69 |
| CIBR-2145 |
110 |
212 |
54 |
77 |
50 |
4.2 |
235 |
21 |
3.6 |
86 |
| CIBR - 2755 |
125 |
230 |
68 |
79 |
58 |
3.6 |
260 |
29 |
2.8 |
90 |
2.) Heat Shrinkable Two, Three & Four Way Cable Breakout
These Heat Shrinkable Two, Three & Four Way Cable Breakout is used for cable applications in electrical distribution and industrial networks. Compaq International manufacturers fabricate these from superior quality materials.
Features
- Thermoplastic Adhesive Liner provides complete environmental protection and insulation
- Heat Shrinkable boots 4 way cable breakouts
- Continuous operation temperature: -55° C to 100° C
- Shrink Ratio accommodates a wide range of cables
- Shrink Temperature: 125° C
- Provides strain relief & mechanical protection
- Seals and protects multi-conductor cable and conduit breakouts.
Dimension Chart
| Code |
No. 01 Core |
D |
d |
L |
I |
TB |
TF |
| |
|
S |
F |
S |
F |
S |
F |
S |
F |
F |
F |
| LV2CBB-0410 |
2 |
30 |
10 |
12 |
4 |
70 |
95 |
18 |
28 |
2 |
2 |
| LV3CBB-0412 |
3 |
37 |
12 |
14 |
4 |
85 |
117 |
18 |
31 |
2.2 |
1.4 |
| LV3CBB - 0820 |
3 |
50 |
22 |
24 |
8.5 |
170 |
180 |
56 |
56 |
3.2 |
2.6 |
| LV3CBB -1230 |
3 |
80 |
36 |
40 |
11.1 |
190 |
215 |
56 |
69 |
3.8 |
3 |
| LV3CBB-2145 |
3 |
110 |
50 |
54 |
21 |
212 |
235 |
77 |
86 |
4.2 |
3.6 |
| LV3CBB - 2755 |
3 |
125 |
58 |
68 |
29 |
230 |
260 |
79 |
90 |
3.6 |
2.8 |
| LV4CBB - 0415 |
4 |
40 |
18 |
12 |
4.5 |
86 |
96 |
19 |
22 |
2 |
1.9 |
| LV4CBB - 0821 |
4 |
55 |
27 |
20.3 |
7.3 |
145 |
169 |
34 |
46 |
3.2 |
2.5 |
| LV4CBB - 0825 |
4 |
67 |
29 |
26 |
7.2 |
145 |
166 |
32 |
44 |
3.2 |
2.5 |
| LV4CBB - 0925 |
4 |
66 |
31 |
25 |
8.3 |
155 |
183 |
33 |
45 |
3.2 |
2.5 |
| LV4CBB-1234 |
4 |
90 |
44 |
34 |
12.5 |
176 |
210 |
38 |
48 |
3.5 |
2.7 |
| LV4CBB- 1234(E) |
4 |
95 |
42 |
38 |
12.2 |
185 |
220 |
47 |
54 |
3.8 |
2.9 |
| LV4CBB - 2454 |
4 |
120 |
40 |
45 |
14 |
170 |
220 |
30 |
48 |
4.5 |
3.3 |
| LV4CBB-1124 |
4 |
84 |
32 |
32 |
9 |
162 |
217 |
35 |
46 |
3.5 |
2.6 |
Technical Data
| Properties |
Requirements |
| Physical |
| Tensile Strength |
8 N/mm2 (min.) |
| Ultimate Elongation |
200% (min.) |
| Thermal Aging |
| (l68 hrs at 175° C) Ultimate Elongation |
200% (min.) |
| Low Temperature Flexibility (-20° C) |
No cracking |
| Heat Shock (4 hrs at 225° C) |
No dripping, flowing or cracking |
| Flammability |
Self ext. within 50 mm |
| Electrical |
| Dielectric Strength |
10 kV/mm (min.) |
| Chemical |
| Water Absorption |
0.5% (max.) |
3.) Compaq Heat Shrinkable End Caps
Heat Shrinkable End Caps are suitable for sealing cable ends, pipe, conduits etc. It is highly known for its high resistance to weathering, moisture contamination and contrary environmental conditions.
Features
- Good resistance against abrasion
- Unaffected by ultra violet light
- Unlimited shelf life
- Good chemical & solvent resistance
Dimension Chart for End Caps (Black)
| Product Code |
D max. |
d min. |
L |
T |
CABLE RANGE |
| CEC-001 |
10 |
4 |
33 |
2 |
4-8 |
| CEC-101 |
20 |
7.5 |
55 |
2.3 |
8-16 |
| CEC-102 |
30 |
10.5 |
70 |
2.8 |
10-30 |
| CEC-201 |
40 |
15 |
90 |
3 |
15-35 |
| CEC-301 |
55 |
25 |
125 |
3.3 |
25-47 |
| CEC-401 |
75 |
35 |
140 |
3.5 |
35-68 |
| CEC-501 |
100 |
45 |
160 |
3.7 |
45-90 |
| CEC-601 |
120 |
63 |
160 |
3.5 |
64-120 |
| CEC-701 |
158 |
63 |
160 |
4.2 |
64-145 |
Technical Data
| Properties |
Requirements |
| Physical |
| Tensile Strength |
8 N/mm2 (min) |
| Ultimate Elongation |
200% (min) |
| Continuous Operating Temperature |
-55° C to 120° C |
| Minimum Shrink Temperature |
120° C |
| Specific Gravity |
1.1 Max. |
| Dielectric Strength |
10kV/mm min. |
| Volume Resistivity |
1012 Ohm Cm. (min.) |
| Low Temperature Flexibility |
No cracking at - 20° C |
| Heat Shock (4 hours at 225° C) |
No cracking, dripping or flowing |
| Water Absorption |
0.2% max |
| Resistance to Fungus |
Does not support growth |
| Copper Corrosion |
Non Corrosive |
| Flammability |
Self extinguishing |
4.) Heat Shrinkable Right Angle Boot
Heat Shrinkable Right Angle Boot is an integral part of termination assembly of Power Cable upto 36 KV. It helps in providing insulation to the bushings in the terminating box . The phase to phase and phase to earth clearance is less than the normal air clearance. Moreover, these boots provides protection against flash overs, short circuiting.
| Product Code |
D |
d |
P |
R |
T |
| E |
S |
E |
S |
S |
S |
S |
| CRAB-1 |
77 |
36 |
37 |
16 |
150 |
120 |
3.8 |
| CRAB-2 |
77 |
37 |
50 |
27 |
164 |
120 |
4.5 |
| CRAB-2A |
90 |
37 |
67 |
27 |
164 |
120 |
4.5 |
| CRAB-3 |
145 |
72 |
70 |
34 |
160 |
150 |
5.0 |
Note:-
- All dimensions are in min.
- E-as supplied
- S-After free recovery
5.) Heat Shrinkable Straight Boot
Heat Shrinkable Straight Boot are made for medium voltage applications upto 36 KV . Heat Shrinkable Straight Boot manufacturers provide shaped components to meet a variety of clients requirements . They are used in protecting cable against flash over or surges induce during working life in switch gear in and transformer boxes.
| Size |
A |
E |
B |
L |
D |
T |
| E |
S |
E |
S |
S |
S |
S |
|
| CSB-1 |
80 |
36 |
36 |
21.5 |
140 |
230 |
45 |
3.6 |
| CSB-2 |
80 |
36 |
58 |
21.5 |
140 |
225 |
45 |
3.6 |
| CSB-3 |
140 |
65 |
60 |
33 |
140 |
325 |
45 |
4.2 |
Note:-
- All dimensions are in min.
- E-as supplied
- S-After free recovery
6.) Heat Shrinkable Creepage Extension Shed (Rain -Shed)
Heat Shrinkable Creepage Extension Sheds ( Rain Sheds ) manufacturers fabricate these from high quality cross linked polyolefin material. It brings exceeding non tracking behaviour, insulation and long term service reliability. They have physical properties, excellent stability and high resistance against chemicals.
| Code |
AØ |
dØ
E. Min. |
dØ
S. Max. |
H
Min. |
Thickness
(S) Min. |
| 120-1 |
93 |
37 |
16 |
26 |
2.5 |
| 120-2 |
125 |
50 |
21 |
31 |
2.8 |
| 120-3 |
143 |
66 |
31 |
35 |
2.8 |
7.) Heat Shrinkable Busbar Insulation Tape
Heat Shrinkable Busbar Insulation Tape manufacturers design to insulate and protect medium voltage Busbar & switchgear applications.
Heat shrinkable tapes are used for bunching of conductor and cables, connections insulation and surface conditioning of cables and conductors insulations. They also help in protection of structural components exposed to the abrasion, the mechanical damages and corrosion.
| Order Ref. Number |
As Supplied Width (mm) |
As Supplied Wall Thickness (mm) |
Standard Length (M) |
| HBIT-1 |
25 |
1 |
5 or 10 |
| HBIT-2 |
50 |
1 |
5 or 10 |
| HBIT-4 |
100 |
1 |
5 or 10 |
8.) Heat Shrinkable Busbar Insulation Tubing (Red & Brown)
Heat Shrinkable Busbar Insulation Tubing (Red & Brown) manufacturers introduce its range which are specially formulated, cross-linked, flame-retardant, track-resistant polyolefin. All these shrink to fit rectangular, square or round busbars. Furthermore, it also cover and insulate in line bolted connections of regular busbars.
| Product Code |
Internal Diameter Expanded Position |
Internal Diameter In Full Shrink |
Wan Thickness In Full Shrink Position |
| COJ 20/8 |
20 |
8 |
3.0 |
| COJ 25/8 |
25 |
8 |
3.0 |
| COJ 30/12 |
30 |
12 |
3.0 |
| COJ 40/16 |
40 |
16 |
3.0 |
| COJ 50/20 |
50 |
20 |
3.0 |
| COJ 70/20 |
70 |
20 |
3.0 |
| COJ 95/29 |
95 |
29 |
3.0 |
| COJ 100/28 |
100 |
28 |
3.5 |
| COJ 115/34 |
115 |
34 |
3.5 |
| COJ 120/38 |
120 |
38 |
3.5 |
| COJ 150/45 |
150 |
45 |
4.0 |
| COJ 180/50 |
180 |
50 |
4.0 |
| COJ 200 / 60 |
200 |
60 |
4.0 |
| COJ 140/45 |
140 |
45 |
4.0 |
| COJ 160/52 |
160 |
52 |
4.0 |
|
